NFPA 70E - Arc Flash Training - Tools

Fire Standards . Com (NFPA Books)

ESWP Co. Sitemaps

Fire Standards Sitemaps

Click here for 70e simplified

Purchase NFPA Standards @

Fire Standards . Com

March 22, 2010 NFPA 70E Training (Lebanon Ohio) Click Here

Electrician'S Package (Training, PPE, Tools) Click Here

NFPA 70E Training Prices (Click Here) Meets OSHA Requirements

ESWP Co. can provide NFPA 70E Training on your site. NFPA 70E Training price, $249.00 per person!

Arc Flash Clothing Insulated Tools NFPA Books Electrical Training

Buy NFPA 70E 2009 edition, NFPA 70E Clothing, Arc Flash Training at ESWP Co.

Best Value Arc Flash Clothing Level 2 Kit + Insulated Tools

Welcome to Electrical Safe Work Practices Home Page. Our goal is to educate and supply the electrical community with NFPA 70E and OSHA 1910 Subpart S compliance knowledge and products. ESWP Co. is your NFPA 70E resource. Use the tabs on the left hand side of the page to explore the site.

70E Handbook now Available / Reduced Price 70E Set

ESWP Co. Flyer #1

ESWP Co. Flyer #2

The Electrical Hazards of Arc Flash and Electrical Shock kill over 400 workers each year. Electrical accidents disable more than 3,600 workers and send over 2,000 workers to burn centers annualy. Allow ESWP Co. to help you implement an Electrical Safety Program.

ESWP Co. uses 20 plus years of Electrical experience to make Electrical Safety understandable. Use our site to learn the NFPA 70E standards, National Electrical Code requirement, and OSHA Electrical Safety Regulations. Then, allow ESWP Co. to provide you with the Electrical Safety Training, Insulated Tools, and Electrical Safety knowledge you need to comply with 29 CFR OSHA 1910 Subpart S. We can also help you implement an Electrical Safety Program using NFPA 70E Standard for Electrical Safety in the Workplace.

Did you Know:

It’s the Law. OSHA 1910.333 (C) Only Qualified persons may work on electric circuit parts or equipment that have not been de-energized.

It’s the Law. OSHA 1910.332 Employees shall be trained in and familiar with the safety-related work practices required by 1910.331 through 1910.335.

It’s the Law. OSHA 1910.335 (a)(1)(i) Employees working in areas where there are potential electrical hazards shall be provided with, and shall use, electrical protective equipment that is appropriate for the specific parts of the body to be protected and for the work to be performed.

OSHA 1910 Subpart S - Appendix A

“The following references provide information which can be helpful in understanding and complying with the requirements contained in Subpart S:”

NFPA 70E Standard for the Electrical Safety Requirements for Employee Workplaces

Click to enlarge image(s)

Avoid accidents and OSHA fines with the 2009 NFPA 70E®: Standard for Electrical Safety in the Workplace®!

Shock, electrocution, arc flash, and arc blast are responsible for hundreds of worker deaths and thousands of injuries per year in the U.S. alone. Save lives with NFPA 70E 2009: Electrical Safety in the Workplace, the Standard developed for OSHA that details the "hows" behind compliance with OSHA 1910 Subpart S and OSHA 1926 Subpart K.

The 70E 2009 edition is revised to recognize new hazards and increase safety on the job.

Personal Protective Equipment (PPE) protects personnel and can significantly reduce the risk of injury in an arc flash. To help engineers calculate incident energy--the first step in determining the correct type of PPE for a given task—a new Annex D in the 2009 NFPA 70E consolidates all equations, adds new tables, and offers more options to detailed calculations. For example, a new utility table derived from the NEC helps utility and industrial plant workers calculate PPE based on voltage and fault current data.

Improved work practices reduce risks:

A new requirement in the 2009 70E for Fire Rated clothing for H/R Category 1 precludes the use of cotton clothing. This change reduces the risks for second-degree thermal burns.
An expanded Table in Article 130 covers added tasks such as thermographic imaging, and new equipment including arc-resistant switchgear.
Added Article 350 provides first-time requirements for the protection of electrical personnel in R&D labs.
A new exception verifies that 240 V and less power systems fed by a single transformer less than 125 kvs no longer require an arc flash hazard analysis.
Expanded requirements for multi-employer relationships address potential areas of oversight, and improves contractor communication about electrical hazards.
New recordkeeping requirements for training and safety program audits answer OSHA's need for records and ensure data is available when you need it.
Other changes expand your know-how:

Easy-to-see shading identifies new or revised Standard text.
Annex F clarifies the Hazard/Risk evaluation procedure and provides sample worksheets.
A flow chart in Annex J helps users determine the need for an Energized Electrical Work Permit.
Annex M helps workers and supervisors evaluate layering of PPE.
Annex N explains safe work practices near overhead and underground lines.
Engineers, designers, risk managers, maintainers, safety directors, contractors, and owners need the 2009 NFPA 70E to improve worker safety and avoid citations, rising insurance fees, and increased workman's comp costs. (Softbound, Approx 148 pp., 2009)

ESWP Co. is Electrical Safe Work Practices LLC

(Disclaimer)

ESWP Co.'s goal is to provide information and tools to Employers and Employees to help eliminate Electrical Injuries. ESWP Co. would like to share our knowledge and be your supplier of Electrical Safety Items. Our prices are set to give you value. Compare our prices.